Pyrometers AST450C
AST 450C, Si sensors are used for high temperature and small spot size.
STEEL: Pre-heating of Ladle (Measurement of brick lining inside the ladle)
Billet temperature measurement
Wire rod temperature measurement
Forging, Continuous casting etc...
GLASS: Furnace wall (inside) temperature measurement
Molten glass temperature measurement (inside the furnace)
CEMENT: Inside the Rotating KILN clinker temperature measurement
INDUCTION HEATING: Induction heater manufacturers.
Two Wavelength Pyrometer High Temperature
Measured Temperatures Range: 720° - 2500 °C
800° - 3300°C
Emissivity Range: 0.1 – 1.0 Slope adjustable
Spectral Range, μm 0.85 - 1.0
Photodetector Type: Si
Time constant: Serial Output RS232: 20msec – 10sec (adjustable)
Analog output 4-20mA: 2msec - 10sec (adjustable)
Measurement spot size: 10mm from 1m (720° - 2500°C)
5mm from 1m (800° - 3300°C)
Outputs: Serial communication: RS232 Isolated;
Analog output : 4-20mA or (0-20mA / 0-10V) - optional
Power: 18-30V DC
Laser aiming: Class II External, removable cup
Laser Power: <1mW (with external switch)
Laser wavelength 650-690nm (red)
Operating temperature range: 0 °C +50°C, 0 °C +200°C (With Cooling Jacket)
Storage temperature: -20 to +70°C
Operating humidity: Unlimited
Dimensions & Weight: Ø50mm; L=118mm; 0.6kg