Pyrometers AST450
AST 450, Si sensors are used for high temperature and small spot size.
STEEL: Pre-heating of Ladle (Measurement of brick lining inside the ladle) Billet temperature measurement
Wire rod temperature measurement
Forging, Continuous casting etc...
GLASS: Furnace wall (inside) temperature measurement
Molten glass temperature measurement (inside the furnace)
CEMENT: Inside the Rotating KILN clinker temperature measurement
INDUCTION HEATING: Induction heater manufacturers.
One Wavelength Pyrometer High Temperature
Measured Temperatures Range: 600° - 1900 °C
750° - 3200°C
Emissivity Range: 0.1 – 1.0 Value adjustable
Spectral Range, μm 1.0
Photodetector Type: Si
Time constant: Serial Output RS232: 20msec – 10sec (adjustable)
Analog output 4-20mA: 2msec - 10sec (adjustable)
Measurement spot size: 20mm from 1m (600° -1900 °C)
5mm from 1m (750° -3200 °C)
Outputs: Serial communication: RS232 Isolated;
Analog output : 4-20mA or (0-20mA / 0-10V) - optional
Power: 18-30V DC
Laser aiming: Class II Built in, Axial
Laser Power: <1mW (with external switch)
Laser wavelength 650-690nm (red)
Operating temperature range: 0 °C +50°C, 0 °C +200°C (With Cooling Jacket)
Storage temperature: -20 to +70°C
Operating humidity: Unlimited
Dimensions & Weight: Ø50mm; L=118mm; 0.6kg